Effect of Current Density on Properties of Electrodeposited Nickel-Phosphorus Alloy Thin Films

Authors

  • Baskar T Department of Physics, Crown University, Int’l. Chartered Inc. (CUICI) Argentina Campus, South America
  • Shaji George Department of Information and Communication Technology, Crown University, Int’l. Chartered Inc. (CUICI) Argentina Campus, South America
  • Bashiru Aremu Crown University, Int’l. Chartered Inc. (CUICI) Argentina Campus, South America.
  • Digvijay Pandey Department of Technical Education (Government of U.P), India

Keywords:

Electrolytic bath, SEM, Crystalline size, VHN, Ni-Co, X-ray diffraction, VHN

Abstract

Electrode position in different current density was used to prepare nanostructure thin films of NiP. Films deposited with NiP have a texture that shows FCC structure. The structural properties of thin films observed experimentally for different current density were compared. The addition of phosphorus (Co) to nickel thin films will improve their structural and mechanical properties. Electrodeposited NiP films were prepared at various current density of 2,3,4 and 5 mA/cm2. Morphological, structural, and mechanical characterization were performed on them. At 5 mA/cm2, the nickel concentration reached its peak of 79.16wt%. As the current density was raised, the nickel content rose. NiP films were bright and evenly coated. NiP film deposits were also nano scale, with an average crystalline size of about 54 nm.

Downloads

Published

2021-04-09

How to Cite

1.
Baskar T, Shaji George, Bashiru Aremu, Digvijay Pandey. Effect of Current Density on Properties of Electrodeposited Nickel-Phosphorus Alloy Thin Films. Alq J Med App Sci [Internet]. 2021 Apr. 9 [cited 2024 Nov. 22];4(2):18-24. Available from: https://journal.utripoli.edu.ly/index.php/Alqalam/article/view/17

Issue

Section

Articles

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.